An easing of coronavirus prevention measures helps China’s auto plants rev up

Employees wearing face masks following the coronavirus disease outbreak work on a Lynk & Co car production line at Geely’s Yuyao plant in Ningbo city, Zhejiang province, China. REUTERS

In the eastern Chinese city of Yuyao, a group of five face-masked workers at a Geely auto plant, stood almost shoulder to shoulder behind an SUV as they conducted paint and other quality checks.

That scene would not have been possible a month ago.

But Reuters visits to six factories including those operated by Daimler AG’s China venture and Japanese chipmaker Renesas Electronics showed manufacturers in China have begun to ease strict physical distancing rules as the coronavirus outbreak is now contained. China’s daily new coronavirus cases have recently dropped to single digits.

The most significant rule to be relaxed – in line with an easing of guidelines by local governments – has been the requirement that production line workers stand at least 1 metre apart. That rule was put in place by many authorities in February when the outbreak was at its height in China but it was also a rule that auto industry insiders said had hamstrung productivity.

“Workers need to work together to check the quality of the job,” Shen Qingguang, safety manager at Geely’s Yuyao plant where some 1,000 workers build sport utility vehicles for its Lynk & Co marque, told Reuters.

Employees often need to work together on the final assembly line in particular, he added. But where working close together is not deemed necessary, the 1 metre rule still applies and Geely office staff must work 1.5 metres apart.

North American auto plants began reopening this week, introducing temperature monitors for those entering plants, personal protective equipment such as face masks and shields, as well as revamped and deep-cleaned factory floors that emphasise social distancing.

Employees wearing face masks following the coronavirus disease outbreak work on a Lynk & Co car production line at Geely’s Yuyao plant in Ningbo city, Zhejiang province, China. REUTERS

Manufacturers in China are, however, several weeks or in some cases months ahead in terms of reopening, providing a window into how worker practices could evolve. That said, restrictions will vary by country and region.

For Tesla Inc’s Shanghai plant, workers were required to maintain a distance of 1 metre in February but like many other China plants, that rule has now been eased.

In contrast, Tesla’s “Return to Work Playbook” published this month for its Fremont, California factory calls for workers to maintain a distance of 6 feet or 2 metres, or for barriers to be established where that is not possible.

At Beijing Benz Automotive Co, a Daimler venture with China’s BAIC Group, the 1 metre rule has also been relaxed for production line staff and workers wearing face masks could be seen working near each other.

A noticeboard showed weekly production for one line making E-Class sedans, GLC sport utility vehicles and other models had jumped to over 4,000 vehicles from 1,100 in early February.

Indeed, Chinese auto production is by and large back on track, climbing 2.3 percent in April from the same month a year earlier to 2.1 million vehicles. Vehicle sales also grew, up 4.4 percent for their first rise in 22 months. Geely said its Yuyao plant had managed to return to full capacity in early March.

Many strict measures are, however, still in place. At all six plants visited by Reuters, face masks are compulsory – even though some smaller Chinese cities have begun to relax rules about wearing them. Workers must also have their temperatures checked daily and factories are regularly disinfected.

Employees wearing face masks following the coronavirus disease outbreak work on a Lynk & Co car production line at Geely’s Yuyao plant in Ningbo city, Zhejiang province, China. REUTERS

All of the plants visited, which included plants operated by Japan’s SMC Corp, which supplies equipment for production lines, Ningbo Joyson Electronic Corp – a maker of electronic and safety gear for cars, and Hongyu Electric, a wire supplier for vehicles, said they have not had a case of a coronavirus infection since February.

At Geely’s Yuyao plant, rules have also been relaxed for lunch. Previously, workers had to sit on chairs far apart near the production line, all facing one way with their backs to each other.

Now they are allowed back in the canteen, with two workers allowed to sit at a table for four, seated diagonally apart. There are no barriers on the table but sitting directly opposite each other or side by side is still forbidden. Hongyu Electric has introduced similar rules.

Shen, the Geely safety manager, said staff at the Yuyao plant adjusted to wearing masks and “new normal” work practices quickly.

“Everyone wants to be safe,” he said. (REUTERS)

Related post

2022 KTM Adventure 390 launched in India

KTM has officially revealed the updates on the Adventure 390. The all-new 2022 Adventure 390 comes with major upgrades to the bodywork and features, such as the addition of two-mode traction control: street mode and off-road mode.

Read More

TVS Ntorq 125 XT launched in India

TVS Motor Company has launched its new scooter–the Ntorq XT–in India. The newly launched scooter is the company’s most expensive model in its Ntorq-125 series. The XT is based on Ntorq’s disc brake variant, but comes loaded with new features and technology. The scooter has been launched in India at a starting price of INR 1.03 lakh.

Read More

Ioniq 5, Kia EV6, and Taigun nominated for the 2022 World Car Awards

The Hyundai Ioniq 5, Kia EV6, and Volkswagen Taigun have all made it to the 2022 World Car Finals in their respective categories. The Ioniq 5 has been nominated in three different categories, the EV6 in two, and the Taigun in one.

Read More

GWM Haval H6 earns five-star ANCAP safety rating

Great Wall Motor’s (GWM) HAVAL H6 has received high scores in the rigorous Australasian New Car Assessment Program (ANCAP) crash test,

Read More

Komaki debuts in Nepal with two electric scooters–the Venice and the SE

Komaki Electric Vehicles, the Delhi-based EV maker, has debuted in Nepal with the launch of two electric scooter models: the Venice and the SE. Unity Trading Concern Pvt. Ltd has taken the role of distributing the Komaki Electric vehicles in the country. Design The Venice, a retro-styled scooter, comes with a circular LED headlight, LED […]

Read More

Shadow Top Brand Shadow